[language]
STRING_Line_Buf_Mark_End_Not_Empty=最大错误！线段完成后未清除！！！
STRING_FIBER_PWM_NOT_HALF=频率不能设置为0，且占空比必须等于50%
STRING_Ext_Para_OverFlow=电机速度或加速度超出范围
STRING_Card_is_not_connected=Card is not connected
STRING_FUN_Mark_Fail =Mark Fail
STRING_Card_is_Busy_Start_Rask_Fail=Card is Busy,Start Rask Fail
STRING_Layer_number_Over=Layer number Over...
STRING_Data_is_nan=Data is nan...
STRING_PointMark_time_less_than_1=PointMark_time_less_than_1
STRING_Lines_endPoint_less_than_2=Lines endPoint less than 2
STRING_not_Open_OffLine_File=Can't Open OffLine File
STRING_not_Open_Box_File=Can't Open Box File
STRING_UnSuported_Cali_Type=UnSuported Cali Type!!
STRING_Line_Less_Than_1=Line Less Than 1
STRING_OffLineFile_is_too_Big=OffLineFile is too Big
STRING_Fifo_data_error=Fifo data error
STRING_Ext_Axis_number_Over=Ext Axis number Over...
STRING_illige_Call_markFunc_Same_time=非法同时调用打标函数！
STRING_mark_not_start=mark not start...
STRING_dotMark_is_illige_for_rotationMark=点焊不符合滚动打标要求
STRING_line_direction_err_for_rotationMark=线条方向不符合滚动打标要求
STRING_mark_error=mark error...
STRING_markTime_not_add=数据流时间非依次递增，请联系供应商!!!
STRING_LineEnegyWaveTooLong=线能量波形设置过长，请确认是否合理！
STRING_Card_is_Marking_StopFail=板卡处于运行状态，中止失败
STRING_ScanDriveMotor_TimeErr=振镜驱动电机时间异常
STRING_WriteReadFlash_not_same=flash写入异常！
STRING_Flush_Fail=参数更新到板卡异常！
STRING_MarkData_is_not_Locked_to_use=MarkData_is_not_Locked_to_use
STRING_Download_no_Nand=当前板卡无脱机功能
STRING_ERR_UART=串口接收数据格式不符
STRING_Laser_is_already_on_when_open=STRING_Laser_is_already_on_when_open
STRING_laser_time_is_Minus=laser_time_is_Minus!
STRING_DllCfg_different_With_Card=DllCfg_different_With_Card!
STRING_Task_Over_Time=Task_Over_Time!
STRING_MarkLaserByIO_illigel_enable_dot_line_both=MarkLaserByIO层参数不允许同时使能线焊波形，点焊波形
STRING_MemoryException=内存不足!
STRING_preLaserOff_BigThan_CurLaserOn=切换激光时间不一致
